If you used the Pheromone Spray pray twice but if you are have the Pheromone liquid use a small cake brush to apply it.
I just wanted to show the way to apply the liquid using liquid form.
I am more satisfied using liquid as compared to using those canister spray.
If you use liquid you are 100% sure that those pheromone will be properly applied and you can see the wetness on those spots.
The spray especially when the bottle is about to finish the making will be less visible and sometime only gas will come out of the nozzle.
What I did was to firstly try to locate the number of fresh bird shit spots on each floor.
Once you have them in you mind you might want to start from one location and move to the next in a proper sequence.
Use a strong ladder to climb and make sure the ladder is properly opened and locked.
Move the ladder to those active spots and climb with a small container with the liquid plus the cake brush.
Inspect the spot carefully and see if their are any markings.
If there are you can start to apply on it and around it.
Usually these fresh spots are at corners or above or near the internal sound tweeters.
Apply not only on the spot but also those areas that are favored by your tenant. A good example is the corner covers or a fake nest near by.
Once you finish doing that move to the next and make sure the container are well secured.
Have a good look at these pictures taken before and after applying the liquid.
Let us hope that by next visit the birds will spit more saliva and become your permanent tenant.
I also applied the liquid onto a nest which was half done.
Let see what happen after applying the liquid.
Enjoy reading and viewing these photos: