Yesterday Feb 16th 2015, I was in Rompin and ordered the necessary items for the BH revamp operation.
This is mainly due to the fact that this coming Thursday CNY will see that most of those hardware shop will close for a few days.
After calculating the number of wood and cement boards required hurriedly ordered the items.
After receiving all the ordered good came back to Kuala Lumpur.
The total travelling time was 10 hours up and down.
My two workers will be ready to move this Monday Feb 23rd 2015.
Very excited to move and get the revamp operation started.
My proposal to the owner was to do up two of the 4 floors and see what happened.
If the two converted floors does well then he should look into the other two floors.
The total number of days required will be about 20-25 days starting from Feb 23rd 2015.
There will be some problems with this BH.
The ceiling height of the top floors are way above 12 feet.
The ground floor is even taller about 16 feet.
This high ceiling will make the nesting planks installation slow.
The use of specially made rack might solve some of the issue.
However I still believed that the ceiling height of a BH should not be too high.
Minimum requirement is 7 feet.
My best recommendation is to go around 8-9 feet.
Much easier to install any thing on the ceiling and safer during harvesting or maintenance.
Main concern is the climbing up of those ladder up and down to pick those nests on installation of tweeters or fake nests,
If the owner should climbed the ladder and for some reason he fell down. That it.
He has very little chance of survival.